Double Glazed Window Repair
Double glazing is an excellent energy efficient investment that stops loss of heat in winter and helps to keep your home cooler in the summer. Double glazing windows repaired when needed is an excellent way to keep them working effectively.
Over time your double glazed windows may suffer from issues such as condensation and misting. Double glazed windows may be difficult to open and close.
Broken Panes
A ball that is rogue or a flying stone from your lawnmowers or a strong storm can shatter your double-pane windows which can expose your home to the elements. Although a window that is cracked can be difficult to fix, you don't have to have it replaced entirely. The insulated glass that is between two glass panes is still in good shape So you can repair your double-paned window yourself.
You'll first need to remove any broken glass from the frame. You'll need to be careful to keep glass shards from falling to the floor or slipping off the frame. Wear work gloves to protect you hands, and an abrasive cloth around the damaged glass to avoid further cuts or damage. After you have removed the broken glass clean the frame of the window thoroughly to get rid of any sealant or other debris. It is essential to sand rough areas of the frame to ensure a smooth surface for the new glazing.
Once the frame is cleaned and dried, you can apply a fresh layer of glazing to the seam where the broken pane was removed. This is the most effective way to keep your window sealed and protected and help you save energy costs by preventing drafts and water from entering your home. Next, you will need to choose the right glazing material. Some options include clear tape which is more durable than regular tape and will help keep your window from further cracking, as well as glazing film that resembles clear plastic wrap. The advantage of this choice is that it can be painted over to match your frame and will also keep snow and rain out as well.
Whatever material you use it is important to press the glazier's points into the place where the putty joins your frame. These will hold the newly-formed glass in place and assist it to adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes that you simply roll over the frame rabbets.
Condensation
Double glazing can be prone to condensation issues. If you experience this issue, it is best to call the company that installed the window. A lot of windows come with warranties and guarantees to address these problems. Fogging and condensation between panes of glass is a clear sign that the seals between your windows are damaged and can only be repaired by a professional who will repair both panes.
It is a tricky process that requires special tools to remove and replace the old window. A professional can do this task and provide the tools. Making use of these tools can be risky it is best to leave this kind of job to professionals.
If you choose to do this yourself, be sure to wear gloves and safety glasses to protect yourself from any broken pieces of glass that could fly off during the process. It is also crucial to carefully remove all putty and metal glazing points from the grooves where the new window will go. You will also want to brush the frame with wire, and then vacuum or wipe with a damp cloth. After the frame is dry you'll have to purchase a replacement piece of glass that is 1/8" shorter in both directions than the existing window. Check the glass's fit into the grooves.
Depending on your frames You will then have to apply a layer of silicone caulk on the grooves to ensure that your new pane is secured in position. After the silicone caulk has dried, you can smooth it out and make any adjustments. The wood molding can then be put back in place.
Double glazed windows can be difficult to open and close if the weather changes dramatically. Extreme temperatures can cause frames of double-glazed windows to expand or contract, causing them to sag and stick. Try wiping the frames with water and lubricating them if this is the case however it is better to seek help from the company who installed your windows.
Misunderstood
Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing consists of two panes of glass that are separated by an insulating area, typically filled with argon gas for better thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside, allowing you to keep the temperature in your home comfortable.
In time, however, this seal can break down and moisture will begin to build up between the windows, causing them to become cloudy. This occurs because the sun's heat causes the gap between the window panes, causing water to evaporate.
This is a normal process but if it happens between the window panes, it can be a problem since it is no longer able to control the temperature in the room and allow the outside temperature to affect the indoor temperature. If you notice that your double-glazed windows are turning blurred, call the experts at Northfield Glass to investigate.
We can replace a single sealed unit without the need to replace the entire window. This is much less disruptive than a complete replacement. Our misty window repair involves taking off the glass unit, washing it, then replacing it with a fresh one to create an airtight seal.
Some companies in the industry claim that they can inject chemicals through holes drilled into windows that have been misty to eliminate the condensation and fog. We don't recommend this method. This method is not just ugly, but it could also harm your toughened glass, leaving you with a window that isn't functioning properly.
If you don't address the problem immediately it could cause mold, which could not only damage the window, but also risk health issues for your family members. Moisture can also cause other issues within your home, like dampness or rot. In some instances, it may be necessary to replace the entire window.
Blown or failed
Double-glazed windows are made up of two panes of glass with an inert or air between them. This improves their thermal efficiency by keeping heat in and the cold out. Over time, this gas can become depressurised, leading to a number of issues.
One of the most frequently encountered is condensation between the panes. Although window repairs 's a normal phenomenon, it doesn't mean your window is damaged however it could be a sign that you need to seal your windows. Condensation could also be an indication of broken double glazing, which will need to be replaced.
Double-glazed windows can also cause draughts. This could be because of the seal being damaged, a broken handle, or a damaged lock. A draught can be quite evident and can result in higher heating bills Therefore, it is essential that you get this fixed sooner rather than later. Check the seals around the window frame by smelling cold air.
You may also see water beads on the inside of windows if the window seals are failing. This is a sign that you need to seal your double-glazed windows.
Your window frames are designed to move a bit, which is necessary to keep the glass sheets in position. However, with time, this special packaging material can become compacted and this will cause the seal to break. This will allow the air to flow between the panes, decreasing your window's energy efficiency.
A blown seal is a clear indication that your double glazing is damaged and needs to be fixed immediately. A blown seal will stop your double glazing from performing its primary function, which is to keep the cold out and warm air in. Furthermore, a blow-off seal will let your home's moisture in, which can result in mold and other unpleasant conditions. It is important to contact a double glazing repair specialist as soon as you notice a blown seal on your double-glazed windows, as they are able to replace the whole unit.